Linear Ball Bearing Pillow Blocks
Open Pillow Block Linear Ball Bearing with a 1" ID (inner diameter) crowned shell self-aligning bearing inside a housing made of aluminum alloy. The IPPS products all come with a grease zerk fitting, a small hole in the pillow block which is also called a lubrication port. Temperature Range: -4/+176°F..
$185.07
Twin Linear Ball Bearing Pillow Block, closed shell, with a 1.25" ID (inner diameter) bearing inside a housing made of aluminum alloy. Features a low coefficient of friction for smooth operation, a heat-treated alloy steel shell for durability, a resin retainer to reduce noise, and standard double seals at no..
$288.91
Twin Linear Ball Bearing Pillow Block, closed shell, with a 1" ID (inner diameter) bearing inside a housing made of aluminum alloy. Features a low coefficient of friction for smooth operation, a heat-treated alloy steel shell for durability, a resin retainer polymer cage to reduce noise, and standard double seals..
$192.45
Open Linear Ball Bearing Pillow Block with a 1" ID (inner diameter) featuring a crowned shell linear bearing for self-alignment in an aluminum alloy housing. Size interchangeable with industry standards and our Simplicity plain linear bearing series. Temperature Range: -4/+176°F (-20/+80°C) Variant ID Sizes: Available from 1/4" to 2” Inch..
$142.80
Open Linear Ball Bearing Pillow Block with a 3/4" ID (inner diameter) featuring a crowned shell linear bearing for self-alignment in an aluminum alloy housing. Size interchangeable with industry standards and our Simplicity plain linear bearing series. Open shell for use with linear rail supported round shafts Temperature Range: -4/+176°F..
$99.11
Closed Linear Ball Bearing Pillow Block with a 1.5" ID (inner diameter) featuring a crowned shell linear bearing for self-alignment in an aluminum alloy housing. Size interchangeable with industry standards and our Simplicity plain linear bearing series. Temperature Range: -4/+176°F (-20/+80°C) Variant ID Sizes: Available from 1/4" to 2” Inch..
$214.75
Open Linear Ball Bearing Pillow Block with a 1/2" ID (inner diameter) bearing inside a housing made of aluminum alloy. Size interchangeable with industry standards and our Simplicity plain linear bearing series. Open shell for use with linear rail supported round shafts Temperature Range: -4/+176°F (-20/+80°C) Variant ID Sizes: Available..
$78.89
Closed Pillow Block Bearing featuring a Linear Ball Bearing with a 10mm ID (inner diameter) inside a housing made of aluminum alloy. Temperature Range: -4/+176°F (-20/+80°C) Variant ID Sizes: Available from 1/4" to 2” Inch Series, 8mm to 50mm Metric Interchangeable: Size interchangeable with industry standards and our Simplicity plain..
$59.49
Twin Linear Ball Bearing Pillow Block, closed shell, with a 1/2" ID (inner diameter) bearing inside a housing made of aluminum alloy. Features a low coefficient of friction for smooth operation, a heat-treated alloy steel shell for durability, a resin retainer polymer cage to reduce noise, and standard double seals..
$113.71
Twin Linear Ball Bearing Pillow Block, closed shell, with a 3/4" ID (inner diameter) bearing inside a housing made of aluminum alloy. Features a low coefficient of friction for smooth operation, a heat-treated alloy steel shell for durability, a resin retainer polymer cage to reduce noise, and standard double seals..
$134.03
Twin pillow block linear ball bearing, open shelled, with a 1" ID (inner diameter) crown shelled bearing inside an aluminum alloy housing. Part of the Precision Plus self-aligning series, the IPPS twin bearings feature two grease zerk fittings, known as lubrication ports, located in the pillow block. Open shelled for..
$336.56
Closed Linear Ball Bearing Pillow Block with a 1.5" ID (inner diameter) crowned shell self-aligning bearing inside a housing made of aluminum alloy. The IPPS products all come with a grease zerk fitting, a small hole in the pillow block which is also called a lubrication port. Temperature Range: -4/+176°F..
$289.13
Closed Pillow Block Bearing consisting of a Linear Ball Bearing with a 25mm ID (inner diameter) inside a housing made of aluminum alloy. Temperature Range: -4/+176°F (-20/+80°C) Variant ID Sizes: Available from 1/4" to 2” Inch Series, 8mm to 50mm Metric Interchangeable: Size interchangeable with industry standards and our Simplicity..
$108.54
Double linear ball bearing pillow block, open shelled, with a 2" inner diameter (ID) self-aligning bearing inside an aluminum alloy housing with 2 lubrication ports called "grease zerk fittings" on the side. Interchangeable with industry standards, the bearing has a low coefficient of friction, a heat-treated alloy steel shell for..
$1,089.00
Linear ball bearing pillow block, open shelled, with a 2" inner diameter (ID) self-aligning bearing inside an aluminum alloy housing with a lubrication port called a "grease zerk fitting" on the side. Interchangeable with industry standards, this bearing has a low coefficient of friction, a heat-treated alloy steel shell for..
$534.02
Linear ball bearing pillow block, closed, with a 2" inner diameter (ID) self-aligning bearing inside an aluminum alloy housing with a lubrication port called a "grease zerk fitting" on the side. Interchangeable with industry standards, this bearing has a low coefficient of friction, a heat-treated alloy steel shell for durability,..
$450.98
Twin Linear Ball Bearing Pillow Block, open shelled, with a 3/4" ID (inner diameter) bearing inside a housing made of aluminum alloy. Features a low coefficient of friction for smooth operation, a heat-treated alloy steel shell for durability, a resin retainer to reduce noise, and standard double seals at no..
$152.77
Twin Linear Ball Bearing Pillow Block, closed shell, with a 5/8" ID (inner diameter) bearing inside a housing made of aluminum alloy. Features a low coefficient of friction for smooth operation, a heat-treated alloy steel shell for durability, a resin retainer to reduce noise, and standard double seals at no..
$127.12
Twin Linear Ball Bearing Pillow Block, open shelled, with a 1" ID (inner diameter) bearing inside a housing made of aluminum alloy. Features a low coefficient of friction for smooth operation, a heat-treated alloy steel shell for durability, a resin retainer polymer cage to reduce noise, and standard double seals..
$221.83
Twin Linear Ball Bearing Pillow Block, open shelled, with a 1.25" ID (inner diameter) bearing inside a housing made of aluminum alloy. Features a low coefficient of friction for smooth operation, a heat-treated alloy steel shell for durability, a resin retainer polymer cage to reduce noise, and standard double seals..
$334.37
Linear Ball Bearing Pillow Blocks feature an aluminum alloy housing with a bearing inside. Available in single or twin sizes (twin equating to two standard blocks back-to-back), they offer open bearing shells for rail-supported shafts, closed shells for full shaft stability and adjustable variants with an open slit down the side of the bearing. The ball bearings, paired with a heat-treated alloy steel shell, deliver a low coefficient of friction for smooth operation, while resin retainers (polymer cages) enhance efficiency and reduce noise. Available in inch (1/4" to 2") and metric (8mm to 50mm) sizes, they are interchangeable with industry standards and our Simplicity plain linear bearing series. Double seals, included as standard at no additional cost, protect against contaminants, extending bearing life. They are compatible with press-fit or slip-fit installation using epoxy. Select variants are self-aligning with a crowned bearing shell inside the housing and include a grease zerk fitting (lubrication port) on the side for easy maintenance.
- Temperature range of -4/+176°F (-20/+80°C)
- Static capacity up to 1,700 lb (7,900 N), supporting heavy loads
- Dynamic capacity up to 850 lb (3,800 N), ensuring reliable motion
- Low coefficient of friction from ball bearings
- Resin retainers (polymer cages) for high efficiency and reduced noise
- Inch and metric sizing options
- Double seals protect against contaminants, extending bearing life
- Press-fit or slip-fit with epoxy, compatible with full or end-supported shafts
Recently Viewed Products
Exclusive section that stores the history of product views